Home

Part Numbers

For fast and accurate part numbers and technical information on specific inserts try out the KATO Product Wizard.

Example of a KATO CoilThread Tool part number:

Example

Tool Type1
(Tangless/Tanged)
Tool Style2 Thread Designation3 Size Designation4 Component/Replacement Part5
Blank for CoilThread (Tanged) KPA - KATO Prewinder Air C - Unified Coarse Chart Below D - Prewinder Body
2 - Prefix for CoilThread II Tangless Inserts F - Unified Fine K - Pawl Kit (add a K to the end pawl part number; includes one pawl, two pins, and two springs)
M - Metric M - Mandrel Assembly (includes mandrel, pawl, pin, and spring fully assembled and ready for use)
S - Spacer Set (includes 3 spacers + 1 thick shim + 3 thin shims, where applicable)

How to Order - Complete Tool Requires the Following Parts:


Thread
Size
Tangless
Front End
Assembly 2
Tangless
Replacement
Pawl
Tanged
Front End
Assembly 2
Torque Limiting
Clutch Drive1
Air
Motor
Adapter Filter
Regulator
Lubricator
Linear Torque
Arm
Unified Coarse
2-56 2KPAC-02 2KIPC-02 KPAC-02 CT9602 CT25017 CT9605 2KFRL-1 2KLRM-1A
4-40 2KPAC-04 2KIPC-04 KPAC-04
6-32 2KPAC-06 2KIPC-06 KPAC-06 ---
8-32 2KPAC-2 2KIPC-2 KPAC-2
10-24 2KPAC-3 2KIPC-3 KPAC-3
1/4-20 2KPAC-4 2KIPC-4 KPAC-4
5/16-18 2KPAC-5 2KIPC-5 KPAC-5 CT9705
3/8-16 2KPAC-6 2KIPC-6 KPAC-6
7/16-14 --- --- KPAC-7
1/2-13 --- --- KPAC-8
Unified Fine
6-40 --- --- KPAF-06 --- CT25017 CT9605 2KFRL-1 2KLRM-1A
8-36 --- --- KPAF-2
10-32 2KPAF-3 2KIPF-3 KPAF-3
1/4-28 2KPAF-4 2KIPF-4 KPAF-4
5/16-24 2KPAF-5 2KIPF-5 KPAF-5 CT9705
3/8-24 2KPAF-6 2KIPF-6 KPAF-6
7/16-20 --- --- KPAF-7
1/2-20 --- --- KPAF-8
Metric Coarse
M2.5X.45 2KPAM-2.5 2KIPM-2.5 KPAM-2.5 CT9602 CT25017 CT9605 2KFRL-1 2KLRM-1A
M3X0.5 2KPAM-3 2KIPM-3 KPAM-3
M3.5X0.6 --- --- KPAM-3.5
M4X.7 2KPAM-4 2KIPM-4 KPAM-4 ---
M5X.8 2KPAM-5 2KIPM-5 KPAM-5
M6X1 2KPAM-6 2KIPM-6 KPAM-6
M7X1 --- --- KPAM-7
M8X1.25 2KPAM-8 2KIPM-8 KPAM-8 CT9705
M10X1.5 2KPAM-10 2KIPM-10 KPAM-10
M12X1.75 2KPAM-12 2KIPM-12 KPAM-12
Metric Fine
M8X1 --- --- KPAM-8X1 --- CT25017 CT9705 2KFRL-1 2KLRM-1A
M10X1 --- --- KPAM-10X1
M10X1.25 --- --- KPAM-10X1.25
M12X1.25 --- --- KPAM-12X1.25
M12X1.5 --- --- KPAM-12X1.5

Notes:

  1. The Torque Limiting Clutch Drive must be used with Tangless thread sizes 2-56, 4-40, M2.5 & M3. KATO will not warrantee the mandrels or pawls without the use of the Clutch Drive.
  2. The Front End Assembly is designed to work with 1, 1.5, and 2 diameter inserts, for 2.5 and 3 diameter inserts, please contact KATO for availability.