Home

Part Numbers

For fast and accurcate part numbers and techinical information on specific inserts try out the KATO Product Wizard.

Example of a KATO CoilThread Tool part number:

KATO Hex Electric Part Number

Tool Type1
(Tangless/Tanged)
Tool Style2 Thread Designation3 Size Designation4 Component / Replacement Part5
Blank for CoilThread (Tanged) KHE - KATO Hex Electric C - Unified Coarse Chart Below G - Nylon Guard (where applicable)
2 - Prefix for CoilThread II Tangless Inserts KPE - KATO Prewinder Electric F - Unified Fine H - Adjusting Sleeve Housing without Nylon Guard (where applicable)
KRE - KATO Round Electric M - Metric M - Mandrel/Mandrel Assembly
  S - Spacer Set (includes 3 spacers + 1 thick shim + 3 thin shims, where applicable)

How to Order - Complete Tool Requires the Following Parts:

  • SBT-50 Power Transformer (CT5407)
  • KFS-12 Electric Driver (CT5408)
  • Hex Shaft Mandrel Assembly (see part numbers)
  • KATO also recommends using the KATO Linear Torque Arm (2KLRM-1)


Hex Electric Part Numbers

Thread
Size
Tangless
Hex Tool1
Tangless
Replacement
Mandrel
Tangless
Replacement
Pawl
Tanged
Hex Tool
SBT-50 Power
Transformer4
Electric
Driver
Linear
Torque
Arm
Unified Coarse
2-562KHEC-022KHEC-02M2KIPC-02KHEC-02CT5407CT54082KLRM-1
4-402KHEC-042KHEC-04M2KIPC-04KHEC-04
6-322KHEC-062KHEC-06M2KIPC-06KHEC-06
8-322KHEC-22KHEC-2M2KIPC-2KHEC-2
10-242KHEC-32KHEC-3M2KIPC-3KHEC-3
12-24---------KHEC-1
1/4-202KHEC-42KHEC-4M2KIPC-4KHEC-4
5/16-182KHEC-52KHEC-5M2KIPC-5---CT5406
3/8-162KHEC-62KHEC-6M2KIPC-6---
Unified Fine2
10-322KHEF-F32KHEF-F3M2KIPF-3KHEF-3CT5407CT54082KLRM-1
2KHEF-L32KHEF-L3M
Metric Coarse2
M2X.432KHEM-F22KHEM-F2M2KIPM-2---CT5407CT54082KLRM-1
M2.5X.452KHEM-F2.52KHEM-F2.5M2KIPM-2.5KHEM-2.5
2KHEM-L2.52KHEM-L2.5M
M3X.52KHEM-F32KHEM-F3M2KIPM-3KHEM-3
2KHEM-L32KHEM-L3M
M3.5X.6---------KHEM-3.5
M4X.72KHEM-F42KHEM-F4M2KIPM-4KHEM-4
2KHEM-L42KHEM-L4M
M5X.82KHEM-F52KHEM-F5M2KIPM-5KHEM-5
2KHEM-L52KHEM-L5M
M6X12KHEM-F62KHEM-F6M2KIPM-6KHEM-6
2KHEM-L62KHEM-L6M
M8x1.2532KHEM-F8---See NotesKHEM-8
2KHEM-L8---
M10x1.532KHEM-F10---See Notes---CT5406
2KHEM-L10---
M12X1.7532KHEM-F12---See Notes---
2KHEM-L12---

Notes

  1. The Tangless Mandrel Assembly consists of the installation mandrel (hex shaft), installation pawl, spring, pin, wrenches, and adjusting sleeve fully assembled and ready for use.
  2. For Improved Tangless installation UNF & Metric thread sizes use a different installation mandrel for Free-Running and Locking CoilThread inserts, this is indicated by the -F and -L designation in the part number. KATO strongly recommends using the Prewinder Electric Tool (KPE) for Fine and Metric thread size.
  3. Not compatible with the KATO One Pawl Fits All system at this time.
  4. Use CT5407-EU for European model (240V).