Home

Part Numbers

For fast and accurcate part numbers and techinical information on specific inserts try out the KATO Product Wizard.

Example of a KATO CoilThread Tool part number:

Example

Tool Type1
(Tangless/Tanged)
Tool Style2 Thread Designation3 Size Designation4 Component / Replacement Part5
Blank for CoilThread (Tanged) KHE - KATO Hex Electric C - Unified Coarse Chart Below G - Nylon Guard (where applicable)
2 - Prefix for CoilThread II Tangless Inserts KPE - KATO Prewinder Electric F - Unified Fine H - Adjusting Sleeve Housing without Nylon Guard (where applicable)
KRE - KATO Round Electric M - Metric M - Mandrel/Mandrel Assembly
  S - Spacer Set (includes 3 spacers + 1 thick shim + 3 thin shims, where applicable)

How to Order - Complete Tool Requires the Following Parts:

  • SBT-50 Power Transformer (CT5407)
  • KFS-12 Electric Driver (CT5408)
  • Prewinder Adapter (CT5408-PA)
  • Front End Assembly (see part numbers)
  • KATO also recommends using the KATO Linear Torque Arm (2KLRM-1)


Prewinder Electric Tool Part Numbers

Thread
Size1
Tangless
Front End
Assembly
Tangless
Replacement
Pawl
Tanged
Front End
Assembly
SBT-50 Power
Transformer2
Electric
Driver
Prewinder
Adapter
Linear
Torque
Arm
Unified Coarse
2-562KPEC-022KIPC-02KPEC-02CT5407CT5408CT5408-PA2KLRM-1
4-402KPEC-042KIPC-04KPEC-04
6-322KPEC-062KIPC-06KPEC-06
8-322KPEC-22KIPC-2KPEC-2
10-242KPEC-32KIPC-3KPEC-3
1/4-202KPEC-42KIPC-4KPEC-4
Unified Fine
10-322KPEF-32KIPF-3KPEF-3CT5407CT5408CT5408-PA2KLRM-1
1/4-282KPEF-42KIPF-4KPEF-4
Metric Coarse
M2.5X.452KPEM-2.52KIPM-2.5KPEM-2.5CT5407CT5408CT5408-PA2KLRM-1
M3X.52KPEM-32KIPM-3KPEM-3
M4X.72KPEM-42KIPM-4KPEM-4
M5X.82KPEM-52KIPM-5KPEM-5
M6X12KPEM-62KIPM-6KPEM-6

Notes

  1. The Front End Assembly is designed to work with 1, 1.5, and 2 Diameter inserts. For 2.5, and 3 Diameter. Inserts, please contact KATO for availability.
  2. Use CT5407-EU for European model (240V).